Slitting Machine Manufacturer: Issues to Pay Attention to During the Debugging of Slitting Machine Equipment
Release time:
2022-12-30
The slitting machine manufacturer understands that the slitting machine, also known as the slitting line or slitter, is used to uncoil, cut, and rewind metal coils into the desired inner width. It is suitable for processing cold-rolled and hot-rolled carbon steel, silicon steel, tinplate, stainless steel, and various metal materials with coated surfaces.
Slitting Machine Manufacturer: Issues to Pay Attention to During Slitting Machine Equipment Debugging
The slitting machine manufacturer understands that the slitting machine, also known as the slitting line, is used to uncoil, cut, and roll metal coils into the required inner width. It is suitable for processing cold-rolled, hot-rolled carbon steel, silicon steel, tinplate, stainless steel, and various metal materials with surface coatings.
It is normal for the material in the slitting machine pit to be interlaced. The main reasons for this phenomenon are as follows: uneven thickness of raw materials, thicker steel strips require greater force at the winding point, which leads to an increasing outer diameter of the winding. Under the same angular velocity, the faster the winding line speed, the less material remains in the pit. However, thinner strips have a smaller winding outer diameter and winding line speed, which leads to the interlacing of strips in the pit.
The tension of the organization is uneven. The tension of the organization determines the key to the tightness of the winding. High-tension strips have a smaller winding outer diameter, and vice versa. The larger the outer diameter of the coil, the greater the winding line speed.
During the debugging of the slitting machine equipment, attention should also be paid to:
The debugging methods of different slitting machines are generally similar. When starting the punching machine for continuous punching, the speed of the adjusting screw should be rotated clockwise to adjust the feeder, and the slider should move slightly slower. This way, it can be clearly seen whether the slider collides with the nylon pad and the length fine-tuning screw during its reciprocating motion.
When debugging the slitting machine, attention should also be paid to whether the feeding direction is correct, and then the power should be turned on for debugging. When the pressing speed of the equipment remains unchanged, the feeding interval needs to change from long to short. At this time, the screw should be adjusted upwards to reduce the descending interval of the lifting rod, and then the speed adjustment screw should be rotated clockwise to match the feeding with the press speed.
During the debugging and operation of the slitting machine equipment, attention should be paid to adjusting the gap between the material rack and the slitting machine equipment and the feeder. The slitting machine manufacturer should appropriately adjust the gap according to the speed of the punching machine and the feeding length of this feeder, so that the leveled material can smoothly enter the feeder and mold.
The above isSlitting Machine Manufacturerthe content explained by the editor on "Issues to Pay Attention to During Slitting Machine Equipment Debugging." Do you all understand? If you want to know more, feel free to contact the slitting machine manufacturer. I hope the content explained above is helpful to everyone. Thank you for watching, and see you next time.
Wuxi Jianfa Machinery Manufacturing Co., Ltd. was established in the early 1980s and is located in the Wuxi High-tech Economic Development Zone. The company currently has more than 200 employees, covers an area of over 100 acres, has a registered capital of 45 million yuan, and has its own export rights. The company specializes in producing various slitting leveling machines, slitting machine sets, slitting and cutting machines, leveling machines, slitting equipment, straightening machines, cutting machines, leveling machines, and disc slitting machine sets, galvanized production lines, and other series of products.
Related News
If you are interested in us, please contact us!
Our staff will help determine the right solution for your application and provide a quote and detailed timetable.