In order to use the punch leveler to improve work efficiency and machine life, the following editor will bring you some tips:

1. Before starting the leveler, check whether the hydraulic oil of the hydraulic station, the gear box of the reduction box, and the gear oil of the transmission box are full.

2. Before starting the main motor, check and adjust the rotation angle and adjust the working pressure of the hydraulic system. Lubricating oil is injected into each lubrication point, and the operation condition of the mechanical transmission part of the leveling machine is checked to make it flexible in transportation.

3. Operators must wear labor protection supplies and must not leave their posts or stay on duty after starting the machine.

4. After the oil temperature and oil pressure of the hydraulic station are stable, the upper straightening roller is lifted to the initial position. Manual feeding, the plate is sent through the straightening roller and then the upper straightening roller is pressed and clamped.

5. Turn on the main motor of the leveler, and the plate will be straightened at the same time as it moves forward. The motor stops, the straightening roller stops straightening, the upper straightening roller is lifted, and the straightened steel pipe is sent out.

6. The motor of the leveling machine stops, and the straightening roller stops straightening, and the next straightening program instruction is to be repeated

7. After shutting down, turn off the main power supply, and can't change the program controller at will.