The conversion methods of a slitting machine, what materials can a slitting machine process?
Release time:
2022-07-25
The materials that a slitting machine can process include cold-rolled sheets, stainless steel sheets, aluminum sheets, galvanized sheets, and color-coated sheets. From the perspective of slitting machine manufacturers, there are certain differences in the strength of blade materials for different materials, which results in achieving good cutting effects. In small rolling mills, slitting machine equipment must be used, and it is one of the essential pieces of equipment. In addition to this, there should also be some other processing equipment.
Slitting MachineConversion Methods
1. High-speed Switch Valve Mode
Or indirectly drive a fixed opening switch valve, using the output digital signal to control the switch valve. The valve is always switching.
2. Digital-to-Analog Conversion
The electro-hydraulic conversion is achieved by servo valves and proportional valves. The digital-to-analog converter controlling the current acts on the input of the servo valve or proportional valve. When the feedback signal is converted by the analog-to-digital converter, it becomes a digital signal and enters the computer.
3. Stepper Motor Type
In fact, the angle of the stepper motor in the stepper motor controller depends on the number of input pulses. The speed depends on the frequency of the input pulses. Through a set of transmission devices, it is converted into the opening of the valve, which is the change in flow, and this also constitutes the digital flow valve.
Slitting MachineWhat materials can be processed?
The slitting machine, for such machines and equipment, can also be slitting lines and slitting machines, etc. In addition, it belongs to longitudinal cutting equipment and can also belong to metal cutting equipment, which is mainly based on its use.
The materials that the slitting machine can process include cold-rolled sheets, stainless steel sheets, aluminum sheets, galvanized sheets, and color-coated sheets, etc. From the perspective of slitting machine manufacturers. However, for different materials, there is a certain difference in the strength of the blade material, thus achieving a good cutting effect.
In small rolling mills, it is necessary to useSlitting Machineequipment, and it is one of the necessary devices. In addition, there should be some other processing equipment, and the production of steel structures is also required. In addition, there should be uncoiling equipment, leveling equipment, and other machinery to complete the entire production process, so the answers to these two questions are affirmative.
Related News
If you are interested in us, please contact us!
Our staff will help determine the right solution for your application and provide a quote and detailed timetable.